PRE-ORDER: TRiB airCap

airCap_Front.png
airCap_Front.png

PRE-ORDER: TRiB airCap

34.95

NEW FOR 2019

PRE-ORDERS SHIP APRIL 9th

The TRiB airCap is designed to replace your packrafts existing inflation valve cap. Simply unscrew the existing cap, remove the cap tether and replace it with the airCap. Once the craft is inflated, the airCap will give real-time readings, allowing you to see if the pressure gets too high or drops too low.

The TRiB airCap is rugged, waterproof and fully sealed Leafield D7 valve cover. As it is solar-powered, there are no batteries or parts to replace, and it performs in low-light at dusk, dawn, and by headlamp. It also has a small footprint, with a 2.75 in (7 cm) diameter and a weight of 1.4 oz (40 g); it’s a great option for all of our packrafts.

Quantity:
Add To Cart

SPECS

Weight: 1.4 oz
Diameter: 2.75 in

INSTALLATION

Remove the existing valve cap by using a pair of needle nose pliers to inch off the tether. Then replace with the airCap tether, making sure it swings around freely. Pump up your inflatable to the recommended pressure, then screw on the airCap. With suitable light, the airCap will start reading within a couple of seconds, with a range of 0.2 to 20 PSI.

NOTE: Make sure it is fully screwed on so that it doesn’t turn any more, before it will register.